1999 Isuzu Oasis Wiper Blade Size Finder

by

Disclaimer: WiperGuide is supported by readers like you. That means we might make money when you click on one of our recommendations.

When you are looking for windshield wipers, it is important to know what size your windshield is. This will help you find the correct size for your 1999 Isuzu Oasis windshield wipers.

A lot of people are asking themselves what size they should get for their 1999 Isuzu Oasis windshield wipers. The answer to that question largely depends on the size of your windshield.

It is also important that you know that the length of the wiper blade will depend on whether you have a standard or an extended-size windshield.

The 1999 Isuzu Oasis Windshield Wiper Blade Size is 24 in / 600 mm Driver Side, 24 in / 600 mm Passenger Side, and 15 in / 380 mm Rear Wiper.

Detailed Information on Your Particular Side-Wiper Size.

What is the 1999 Isuzu Oasis Driver Side Wiper Size?
Ans: The 1999 Isuzu Oasis Driver Side Wiper Size is 24 in / 600 mm.

What is the 1999 Isuzu Oasis Passenger Side Wiper Size?
Ans: The 1999 Isuzu Oasis Passenger Side Wiper Size is 24 in / 600 mm.

What is the 1999 Isuzu Oasis Rear Wiper Size?
Ans: The 1999 Isuzu Oasis Rear Wiper Size is 15 in / 380 mm.

1999 Isuzu Oasis Windshield Wiper Size Chart

Car Driver Side Passenger Side Rear
1999 Isuzu Oasis 24 in / 600 mm 24 in / 600 mm 15 in / 380 mm
[amazon bestseller='24 in+24 in wiper blade' items='3' template='box']

How to Change 1999 Isuzu Oasis Front & Rear Windshield Wipers Blades

If you want to keep your car and your windshield clean and we know that sometimes we might need a little help. That’s why we compiled this guide on how to change 1999 Isuzu Oasis wiper blades.

Steps to change your 1999 Isuzu Oasis wiper blades are as follows:

  • Try to unscrew the old blade from the arm with a Phillips head screwdriver with precautions.
  • Now, it is required to remove the blade horizontally by pressing on the top of it until it releases from its lock.
  • Why not snap in your new blade with your hands until you hear a click and feel it snap into place? Do it!
  • In the next step, try holding onto the lower part of the rubber tab and pull back on the top of the arm until you release tension off both sides of it.

This will allow you to slide out your new blade and replace it with your old one, and then reverse steps 1-4 to reinstall these blades back onto their respective arms, making sure they click

    Leave a Comment