2016 Nissan Rogue Windshield Wipers Size

by

Disclaimer: WiperGuide is supported by readers like you. That means we might make money when you click on one of our recommendations.

When you are looking for windshield wipers, it is important to know what size your windshield is. This will help you find the correct size for your 2016 Nissan Rogue windshield wipers.

A lot of people are asking themselves what size they should get for their 2016 Nissan Rogue windshield wipers. The answer to that question largely depends on the size of your windshield.

It is also important that you know that the length of the wiper blade will depend on whether you have a standard or an extended-size windshield.

The 2016 Nissan Rogue Windshield Wiper Blade Size is 26 in / 660 mm Driver Side, 17 in / 430 mm Passenger Side, and 12 in / 300 mm Rear Wiper.

Detailed Information on Your Particular Side-Wiper Size.

What is the 2016 Nissan Rogue Driver Side Wiper Size?
Ans: The 2016 Nissan Rogue Driver Side Wiper Size is 26 in / 660 mm.

What is the 2016 Nissan Rogue Passenger Side Wiper Size?
Ans: The 2016 Nissan Rogue Passenger Side Wiper Size is 17 in / 430 mm.

What is the 2016 Nissan Rogue Rear Wiper Size?
Ans: The 2016 Nissan Rogue Rear Wiper Size is 12 in / 300 mm.

2016 Nissan Rogue Windshield Wiper Size Chart

Car Driver Side Passenger Side Rear
2016 Nissan Rogue 26 in / 660 mm 17 in / 430 mm 12 in / 300 mm
[amazon bestseller='26 in+17 in wiper blade' items='3' template='box']

How to Change 2016 Nissan Rogue Front & Rear Windshield Wipers Blades

If you want to keep your car and your windshield clean and we know that sometimes we might need a little help. That’s why we compiled this guide on how to change 2016 Nissan Rogue wiper blades.

Steps to change your 2016 Nissan Rogue wiper blades are as follows:

  • Try to unscrew the old blade from the arm with a Phillips head screwdriver with precautions.
  • Now, it is required to remove the blade horizontally by pressing on the top of it until it releases from its lock.
  • Why not snap in your new blade with your hands until you hear a click and feel it snap into place? Do it!
  • In the next step, try holding onto the lower part of the rubber tab and pull back on the top of the arm until you release tension off both sides of it.

This will allow you to slide out your new blade and replace it with your old one, and then reverse steps 1-4 to reinstall these blades back onto their respective arms, making sure they click

    Leave a Comment